A.Another set of LSPs between PE1 and PE3 and between PE2 and PE4.

B.An additional management VPLS.

C.Another set of SDPs between PE1 and PE3 and between PE2 and PE4.

D.Load balancing has to be enabled within the management VPLS.

A.Bandwidth and replication inefficiency can occur on inter-metro links if there is a lot of multicast traffic

B.Network touches increase with each node added to the mesh.

C.The number of control sessions grows exponentially in a fully meshed network.

D.Spanning-tree is required to prevent loops when using mesh SDPs on the inter-metro links.

A.8 unicast and 8 multipoint.

B.1 multipoint and 8 unicast.

C.8 unicast and 24 multipoint.

D.16 queues, distributed as desired.

E.8 queues, regardless of traffic type.

A.When the route is first received at the P from the PE

B.When the route is propagated from the PE to the CE

C.When the route from the CE is populated into the VRF at the PE

D.When the route from the PE is populated into the VRF at the CE

E.When the route is exported into the MP-BGP table from the VRF

A.A vc-label is signaled per service.

B.Multiple SDPs must be configured and bound to the LSPs for this to be possible.

C.The vc-id is part of the data plane and maps the traffic to the appropriate service.

D.It is not possible to carry multiple services over the same MPLS LSPs.