Question 6
The following statements about the registration process of PIM SM are correct (choose one or more)
Question 7
Regarding the three versions of the multicast group management protocol IGMPv1, IGMPV2, and IGMPv3, which is correct
Question 8
The figure shows the networking application of RRPP. Customer LAN switches SWA, SWB, SWC, and SWD form RRPP ring main ring 1, switches SWB, SWC and SWE form sub-ring 2, and switches SWB, sWC and sWF form sub-ring 3. If Switch SWE is the master node of sub-ring 2, SWF is the master node of sub-ring 3, and switch SWB is the edge node of sub-ring 2 and sub-ring 3. In order to eliminate the defect of broadcast storm under specific conditions of RRPP dual-homing networking, the above information Can know


Question 9
Regarding the compatible operation of RSTP and STP, the following statements are correct:
Question 10
The customer's LAN switch SWA is connected to SWB through GigabitEthenet 2/0/1, and to SWC through GigabitEthernet 2/0/2, and the SWA switch has the following configuration:
[SWA]stp region-configuration
[SWA-mst-region]instance 0 vlan 1 to 100
[SWA-mst-region]instance 2 vlan 101 to 200
[SWA]smart-link group 1
[SWA-smlk-group1 ]protected-vlan reference-instance 0
[SWA-smlk-group1]port gigabitethernet 2/0/1 master
[SWA-smlk-group1 ]port gigabitethernet 2/0/2 slave
[SWA] smart-link group 2
[SWA-smlk-group2]protected-vlan reference-instance 2
[SWA-smlk-group2]port gigabitethernet 2/0/2 master
[SWA-smlk-group2]port gigabitethernet 2/0/1 slave
If the SWA, SWB, and SWC ports allow all VLANs to pass, you can know from the above information
[SWA]stp region-configuration
[SWA-mst-region]instance 0 vlan 1 to 100
[SWA-mst-region]instance 2 vlan 101 to 200
[SWA]smart-link group 1
[SWA-smlk-group1 ]protected-vlan reference-instance 0
[SWA-smlk-group1]port gigabitethernet 2/0/1 master
[SWA-smlk-group1 ]port gigabitethernet 2/0/2 slave
[SWA] smart-link group 2
[SWA-smlk-group2]protected-vlan reference-instance 2
[SWA-smlk-group2]port gigabitethernet 2/0/2 master
[SWA-smlk-group2]port gigabitethernet 2/0/1 slave
If the SWA, SWB, and SWC ports allow all VLANs to pass, you can know from the above information