Free Access H3C.GB0-371-ENU.v2022-08-24.q110 Practice Test (Page 2)

Question 1

The following statements about RP selection in PIMSM are correct (choose one or more)

A.Compare the hash value calculated by the Hash function, the larger value wins

B.First compare the priority of C-RP, the higher priority wins

C.Finally compare the C-RP address, the one with the smaller value wins

D.Finally compare the C-RP addresses, the one with the larger value wins

Question 2

The router runs the IGMPV2 protocol, and the GroupAddress in the Query message received by the host in the directly connected LAN may be (choose one or more)

A.224.0.0.2

B.255.255.255.255

C.225.1.1.1

D.0.0.0.0

E.224.0.0.1

Question 3

As the basis for the realization of the SNMP protocol, the managed objects in the MIB can be identified by the object name or OID. The following descriptions of the managed objects are correct (multiple choice)

A.The nodes in the MIB are divided into leaf nodes and non-leaf nodes. The non-leaf points cannot be accessed

B.Scalar nodes only have read attributes, not write attributes

C.Leaf nodes are divided into phenotype nodes and scalar nodes. When the network management workstation accesses the leaf nodes, the instance ID must be added after the leaf node corresponds to the OID.

D.The managed object exists in the form of a node, which can be represented by object name or OID, and the two are mapped one by one

Question 4

The switches SWA and SWB are connected together through two optical fiber Gigabit Ethernet links, and the switch SWA has the following interface configuration:
[SWA]interface GigabitEthernet 1/0/1
[SWA-GigabitEthernet1/0/1]gvrp
[SWA-GigabitEthernet1/0/1]port link-type trunk
[SWA-GigabitEthernet1/0/1]port trunk permit vlan 1 10
[SWA]interface GigabitEthernet 1/0/2
[SWA-GigabitEthernet1/0/2]port link-type trunk
[SWA-GigabitEthernet1/0/2]port trunk permit vlan 1 10
If you want to configure link aggregation to aggregate these two links together, if the configuration on the SWB is correct, you can know from the above information

A.After link aggregation is configured on SWASWB, if both SWA and SWB enable MSTP on the aggregation port, one of GigabitEthe1/0/1 and GigabitEthe1/0/2 will be blocked

B.Only by changing the configuration of GigabitEthe1/0/2 to be consistent with GigabitEthe1/0/1, can they join the same aggregation group

C.After link aggregation is configured on both SWA and SWB, if both SWA and SWB enable MSTP on the aggregation port, GigabitEthernet1/0/1 and GigabitEthe1/0/2 can participate in forwarding

D.Only when GigabitEthernet1/0/2 and Gigabit1/0/1 allow all VLANs to pass, they can join the same aggregation group

Question 5

As shown in the networking, there is no connection between SWA and SWB at the beginning, and RSTP is enabled for SWA and SWB. When the topology is stable, connect the port E1/0/1 of SWA and SWB. Assuming that SWA will become the new root bridge, the following The correct statement is

A.When SWB receives the Proposal message sent by SWA, it will start the synchronization process to block the old root port, designated port and edge port

B.When SWB receives the Proposal message sent by SWA, it will immediately reply to the Agreement message

C.Port E1/0/1 of SWA and SWB will send Proposal message to request to enter forwarding state

D.SWB does not need to generate BPDUs by itself, and the content of the Agreement message in response is copied from the Proposal message sent by SWA

Other Version: 2967H3C.GB0-371-ENU.v2022-04-18.q117

Latest Upload: 117Oracle.1Z0-1057-23.v2025-09-10.q47; 150Google.Professional-Cloud-Network-Engineer.v2025-09-09.q179; 131SAP.C-S4EWM-2023.v2025-09-08.q83; 156TheSecOpsGroup.CNSP.v2025-09-08.q20; 207CFAInstitute.ESG-Investing.v2025-09-08.q173; 155PECB.ISO-IEC-27001-Lead-Implementer.v2025-09-06.q132; 145Salesforce.Data-Architect.v2025-09-05.q216; 139Adobe.AD0-E605.v2025-09-05.q50; 182Nutanix.NCP-MCI-6.10.v2025-09-05.q55; 114Oracle.1z0-591.v2025-09-05.q104

Question 1

Question 2

Question 3

Question 4

Question 5

Download PDF File