Free Access H3C.GB0-371-ENU.v2022-08-24.q110 Practice Test (Page 9)

Question 36

The core goal of highly reliable redundant network design is

A.Maximize network bandwidth

B.Minimize the existence of a single point of failure in the network

C.Maximize network access security

D.Minimize network management complexity

Question 37

The following statements about RPT and SPT in PIMSM are correct:

A.When the device switches from RPT to SPT, it sends a join message to the multicast source

B.When multicast traffic is forwarded along the RPT, devices along the way have established (S, G) entries corresponding to the multicast source

C.During the process of switching from RPT to SPT, the RP may receive two copies of multicast traffic arriving in the two directions of RPT and SPT. At this time, the RP will send a prune message upstream

D.Compared with RPT, SPT makes multicast packets reach the receiver through the optimal path, which improves the efficiency of packet forwarding

Question 38

As the above topology, the loop formed by SWA, SWB and SWC enables STP, then the following statement is correct:

A.Before joining SWD, after STP convergence, SWB port E0/2 is an alternate port

B.After the STP converges, connect the SWD to the network through the dotted link 1 in the figure, and the SWD will first send the configuration BPDU with itself as the root, and the SWB will immediately respond to the configuration BPDU with the SWA as the root.

C.After the STP converges, connect the SWD to the network through the dotted link 1 in the figure, then the SWD will first send the configuration BPDU with itself as the root, and after the longest Hello Time, the SWC will send the SWD the configuration with the SWA as the root BPDU

D.Before joining SWD, after STP converges, SWC will receive configuration BPDUs from both E0/1 and E0/2

Question 39

The SNMP protocol adopts the C/S structure and gives UDP to realize the message transmission. In order to ensure the normal interaction of protocol messages between the network management workstation and SNMP, they all need to monitor the specific UDP port number. The following statement about them is correct.

A.Both the gateway workstation and SNMP agent monitor UDP port 162

B.Both the network management workstation and the SNMP agent monitor UDP port 161

C.The gateway workstation monitors UDP port 162, and the SNMP agent monitors UDP port 161

D.The gateway workstation monitors UDP port 161, and the SNMP agent monitors UDP port 162

Question 40

Regarding the port filtering mode of VoiceVLAN, the correct statement is

A.In normal mode, the device will no longer check the MAC address of the message after the port enters the VoiceVLAN.

B.In the safe mode, the device will perform a MAC matching check on each packet that will enter the VoiceVLAN for transmission

C.The port filtering mode of VoiceVLAN can be divided into security mode and normal mode.

D.By default, VoiceVLAN works in normal mode

Other Version: 2977H3C.GB0-371-ENU.v2022-04-18.q117

Latest Upload: 105OCEG.GRCP.v2025-09-11.q211; 104HP.HPE0-V27.v2025-09-11.q78; 118Oracle.1Z0-1057-23.v2025-09-10.q47; 150Google.Professional-Cloud-Network-Engineer.v2025-09-09.q179; 131SAP.C-S4EWM-2023.v2025-09-08.q83; 164TheSecOpsGroup.CNSP.v2025-09-08.q20; 223CFAInstitute.ESG-Investing.v2025-09-08.q173; 158PECB.ISO-IEC-27001-Lead-Implementer.v2025-09-06.q132; 148Salesforce.Data-Architect.v2025-09-05.q216; 143Adobe.AD0-E605.v2025-09-05.q50

Question 36

Question 37

Question 38

Question 39

Question 40

Download PDF File