A small company decided to use a single virtual appliance lo filter spam as well as a reverse proxy to filter traffic to its internal web server. Which of the following did the company MOST likely deploy?

Multiple users are reporting that they are unable to access the network. The ENTIRE network is shown in the diagram. PCs are not statically assigned IP addresses. The following devices will display settings:
* WorkstationA
* WorkstationB
* WorkstationC
* WorkstationD
* WorkstationE
* WorkstationF
* WorkstationG
* Laptop1
* Laptop2
* DHCP server1
* DHCP server2
Review the settings and select the box in the diagram that identifies the device causing the issue. Only one device can be selected at a time.
After checking the device that is causing the issue, select the second tab in the lower left hand corner. Identify the reason as to why some users are unable to access the network.
Instructions:
When the simulation is complete, select the Done button to submit.
Part 1












Part 2
Identify the reason as to why some users are unable to access the network.

You have been tasked with testing a CAT5e cable. A summary of the test results can be found on the screen.
Instructions
Step 1: Select the tool that was used to create the cable test results.
Step 2: Interpret the test results and select the option that explains the results. After you are done with your analysis, click the 'Submit' button.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

A customer cannot access a company's secure website. The company's network security is reviewing the firewall for the server and finds the following output:

Which of the following changes should be made to allow all customers to access the company's secure website?

Multiple users are reporting that they are unable to access the network. The ENTIRE network is shown in the diagram. PCs are not statically assigned IP addresses. The following devices will display settings:
Review the settings and select the box in the diagram that identifies the device causing the issue. Only one device can be selected at a time.
After checking the device that is causing the issue, select the second tab in the lower left hand corner. Identify the reason as to why some users are unable to access the network.
Instructions:
When the simulation is complete, select the Done button to submit.
Part 1












Part 2
Identify the reason as to why some users are unable to access the network.