The errors described - dropped packets and CRC (Cyclic Redundancy Check) errors - often indicate electromagnetic interference (EMI) on unshielded twisted pair (UTP) cabling. The correct replacement is STP (Shielded Twisted Pair), which has shielding that protects signals from external interference, ensuring better reliability in noisy environments such as data centers or near heavy electrical equipment.
A . Coaxial is not used for modern Ethernet server-switch links.
B . Shorter UTP cable does not solve EMI issues.
C . Plenum cable refers to cable jacket type for fire safety, not electrical shielding.
STP cabling reduces interference and ensures reliable gigabit+ Ethernet connections between servers and switches.
Reference:
Domain: Network Troubleshooting - Cabling issues, UTP vs. STP, EMI.

Network segmentation involves dividing a network into smaller segments or subnets. This is particularly important when integrating OT (Operational Technology) devices to ensure that these devices are isolated from other parts of the network. Segmentation helps protect the OT devices from potential threats and minimizes the impact of any security incidents. It also helps manage traffic and improves overall network performance.Reference: CompTIA Network+ study materials.

When deploying multiple Power over Ethernet (PoE) devices, the switch's power budget can be exhausted. If the available wattage on the switch cannot supply the additional AP, it will fail to power on. This is the most likely cause when previous APs worked fine but a new one does not.
A . Signal strength affects wireless connectivity, not whether the AP powers up.
B . Duplex mismatch causes poor throughput, not power failure.
D . CRC errors point to cabling issues but do not prevent booting if no power is available.
Reference (CompTIA Network+ N10-009):

When the command switchport voice vlan 69 is used, it tags the voice traffic with VLAN 69, while the workstation traffic continues untagged on the access VLAN, which is typically considered thedata VLAN.
This configuration enables both voice and data traffic over the same port while keeping them in separate VLANs for QoS and traffic management.
Reference:Section 2.2 - Switching Technologies and Features - "Switchport Voice VLAN Configuration"

* Understanding 2.4GHz Interference:
* The 2.4GHz frequency range is commonly used by many devices, including Wi-Fi, Bluetooth, and various industrial equipment. This can lead to interference and degraded performance.
* Mitigation Strategies:
* 5GHz Frequency:
* The 5GHz frequency band offers more channels and less interference compared to the 2.4 GHz band. Devices operating on 5GHz are less likely to encounter interference from other devices, including industrial equipment.
* Non-overlapping Channels:
* In the 2.4GHz band, using non-overlapping channels (such as channels 1, 6, and 11) can help reduce interference. Non-overlapping channels do not interfere with each other, providing clearer communication paths for Wi-Fi signals.
* Why Other Options are Less Effective:
* Mesh Network: While useful for extending network coverage, a mesh network does not inherently address interference issues.
* Omnidirectional Antenna: This type of antenna broadcasts signals in all directions but does not mitigate interference.
* Captive Portal: A web page that users must view and interact with before accessing a network, unrelated to frequency interference.
* Ad Hoc Network: A decentralized wireless network that does not address interference issues directly.
* Implementation:
* Switch Wi-Fi devices to the 5GHz band if supported by the network infrastructure and client devices.
* Configure Wi-Fi access points to use non-overlapping channels within the 2.4GHz band to minimize interference.