Free Access Cisco.300-410.v2025-02-03.q609 Practice Test (Page 64)

Question 311

Exhibit:

An engineer configured R2 and R5 as route reflectors and noticed that not all routes are sent to R1 to advertise to the eBGP peers. Which iBGP routers must be configured as route reflectors to advertise all routes to restore reachability across all networks?

A.R1 and R4

B.R1 and R5

C.R4 and R5

D.R2 and R5

Question 312

Refer to the exhibit. R4 is experiencing packet drop when trying to reach 172.16.2.7 behind R2.
Which action resolves the issue?

A.Insert a /24 floating static route on R2 toward R3 with metric 254

B.Enable auto summarization on all three routers R1, R2, and R3

C.Disable auto summarization on R2

D.Insert a /16 floating static route on R2 toward R3 with metric 254

Question 313

Refer to the exhibit.

With the partial configuration of a router-on-a-stick. Clients in VLAN 10 on Gi2 cannot obtain IP configuration from the central DHP server is reachable by a successful ping from the route. Which action resolves the issue?

A.Configure a valid IP address on the Gi2 interface so that DHCP requests can be forwarded.

B.Configure the Ip dhcp excluded-address 192.168.255.3 command on the Gi1.10 subinterface.

C.Configure the ip header-address 192-168.265.3 command on the Gi2 10 subinterface.

D.Configure the ip/ip/dhcp pool f and network 192.168..210.0.255.255/0 commands.

Question 314

Refer to the exhibit.

AS111 is receiving its own routes from AS200 causing a loop in the network. Which configuration provides loop prevention?
A)

A.Option D

B.Option B

C.Option C

D.Option A

Question 315

Refer to the exhibit.

A company is evaluating multiple network management system tools. Trending graphs generated by SNMP data are returned by the NMS and appear to have multiple gaps. While troubleshooting the issue, an engineer noticed the relevant output. What solves the gaps in the graphs?

A.Configure the CIR rate to a lower value that accommodates all the NMS tools

B.Remove the class map NMS from being part of control plane policing.

C.Separate the NMS class map in multiple class maps based on the specific protocols with appropriate CoPP actions

D.Remove the exceed-rate command in the class map.

Other Version: 10251Cisco.300-410.v2024-12-18.q447; 3703Cisco.300-410.v2023-04-25.q268; 3982Cisco.300-410.v2023-01-28.q148; 2282Cisco.300-410.v2022-11-26.q118; 3201Cisco.300-410.v2022-07-26.q136; 4013Cisco.300-410.v2022-05-02.q98; 7213Cisco.300-410.v2022-01-27.q256

Latest Upload: 286PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 414Nokia.4A0-113.v2026-05-01.q69; 447EC-COUNCIL.312-49v11.v2026-04-30.q214; 412Microsoft.MB-820.v2026-04-30.q101; 284Salesforce.MC-202.v2026-04-30.q57; 327BICSI.INSTC_V8.v2026-04-29.q53; 462NMLS.MLO.v2026-04-28.q82; 303NCARB.Project-Management.v2026-04-28.q27; 555EMC.D-AV-DY-23.v2026-04-27.q184; 1402ServiceNow.CSA.v2026-04-27.q483

Question 311

Question 312

Question 313

Question 314

Question 315

Download PDF File