BNC connectors are commonly used for coaxial cables, including those connecting to external antennas in Wi- Fi, radio, and surveillance systems.
Breakdown of Options:
A). BNC - Correct answer. Used for coaxial cables in wireless and antenna connections.
B). ST - Used for fiber optic cables, not antennas.
C). LC - A fiber optic connector, not for antennas.
D). MPO - Used for multi-fiber optic cables, not RF antennas.
Reference:
CompTIA Network+ (N10-009) Official Study Guide - Domain 1.1: Compare and contrast physical network connectors.
IEEE 802.11: Wireless standards and antenna connectors

A TXT record can be used to store SPF (Sender Policy Framework) and DKIM (DomainKeys Identified Mail) information, which help verify that an email has been sent from a trusted source.

TLS (Transport Layer Security)is the protocol that providesencryption in transit for HTTPS. It ensures data is encrypted between the client (browser) and the web server, protecting it from interception or tampering.
* A. SSHis used for secure terminal access, not HTTPS.
* C. SCADArefers to control systems, not encryption protocols.
* D. RADIUSis an authentication protocol, not for encrypting HTTPS traffic.
#Reference:
CompTIA Network+ N10-009 Official Objectives: 4.2 - Identify common security threats and vulnerabilities.
CompTIA Network+ N10-009 Official Objectives: 4.6 - Explain authentication and access controls.

See the solution in Explanation.
Explanation:
To validate routing between networks hosting Workstation A and File Server 2, follow these steps:
Review Routing Tables:
Check the routing tables of Router A, Router B, and Router C to identify any missing routes.
Identify Missing Routes:
Ensure that each router has routes to the networks on which Workstation A and File Server 2 are located.
Add Static Routes:
If a route is missing, add a static route to the relevant destination network via the correct interface.
Routing Table:
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
S* 0.0.0.0/0 is directly connected, GigabitEthernet3
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
C 10.0.4.0/22 is directly connected, GigabitEthernet2
C 10.0.6.0/24 is directly connected, GigabitEthernet2
L 10.0.6.1/32 is directly connected, GigabitEthernet2
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.27.0/30 is directly connected, GigabitEthernet3
L 172.16.27.1/32 is directly connected, GigabitEthernet3
Routing Table:
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
S* 0.0.0.0/0 is directly connected, GigabitEthernet1
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
C 10.0.0.0/22 is directly connected, GigabitEthernet1
L 10.0.0.1/32 is directly connected, GigabitEthernet1
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.27.4/30 is directly connected, GigabitEthernet1
L 172.16.27.5/32 is directly connected, GigabitEthernet1
Routing Table:
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
S 10.0.0.0/22 [1/0] via GigabitEthernet1
S 10.0.4.0/22 [1/0] via GigabitEthernet2
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.27.0/30 is directly connected, GigabitEthernet2
L 172.16.27.2/32 is directly connected, GigabitEthernet2
C 172.16.27.4/30 is directly connected, GigabitEthernet1
L 172.16.27.6/32 is directly connected, GigabitEthernet1
Install Static Route to 10.0.0.0/22 via 172.16.27.1 (assuming Router C's IP is 172.16.27.1):
Destination Prefix: 10.0.0.0
Destination Prefix Mask: 255.255.252.0
Interface: GigabitEthernet3
Install Static Route to 10.0.4.0/22 via 172.16.27.5 (assuming Router C's IP is 172.16.27.5):
Destination Prefix: 10.0.4.0
Destination Prefix Mask: 255.255.252.0
Interface: GigabitEthernet1
Install Static Route to 10.0.6.0/24 via 172.16.27.2 (assuming Router A's IP is 172.16.27.2):
Destination Prefix: 10.0.6.0
Destination Prefix Mask: 255.255.255.0
Interface: GigabitEthernet2
Install Static Route to 10.0.0.0/22 via 172.16.27.1 (assuming Router B's IP is 172.16.27.1):
Destination Prefix: 10.0.0.0
Destination Prefix Mask: 255.255.252.0
Interface: GigabitEthernet1
Summary of Static Routes:
Router A:
ip route 10.0.0.0 255.255.252.0 GigabitEthernet3
Router B:
ip route 10.0.4.0 255.255.252.0 GigabitEthernet1
Router C:
ip route 10.0.6.0 255.255.255.0 GigabitEthernet2
ip route 10.0.0.0 255.255.252.0 GigabitEthernet1
These configurations ensure that each router knows the correct paths to reach Workstation A and File Server
2, resolving the connectivity issue.

SNMPv3 (Simple Network Management Protocol version 3) provides device monitoring with authentication and encryption. This enhances network visibility and security by ensuring that monitoring data is securely transmitted and access to network devices is authenticated.
Authentication: SNMPv3 includes robust mechanisms for authenticating users accessing network devices.
Encryption: It provides encryption to protect the integrity and confidentiality of the data being transmitted.
Network Management: SNMPv3 allows for detailed monitoring and management of network devices, ensuring better control and security.
Network Reference:
CompTIA Network+ N10-007 Official Certification Guide: Covers SNMP versions, their features, and security enhancements in SNMPv3.
Cisco Networking Academy: Provides training on implementing and securing SNMP for network management.
Network+ Certification All-in-One Exam Guide: Explains the benefits and security features of SNMPv3 for network monitoring.